Looking to stain your pressure-treated wood, and don't know what color to choose? As a result, it protects and retains its colour for longer. However, if you do decide to treat or paint your pressure treated fence or shed, be sure that the coating is recommended for use with pressure-treated wood. As these boards age, I have seen them become susceptible and have to be replaced. This is because of the specifics of the treatment and colour process: the preservative is in the form of microparticles, which are forced into the wood under pressure, with no solvent involved. Take a look at our pressure treatment videos to find out more.. As for colour, I've never dealt with any pressure treated wood outside of the standard green-gray stuff. Pressure-treated wood comes in various pre-cut dimensions. Restore-A-Deck Solid Color Stain for Decks & Exterior Wood; Best Deck Stain For Pressure Treated Wood Buyer’s Guide. Once the wood absorbs water on the surface, it’s ready for paint. Although it is a more expensive option, wood that has been pressure-treated using micronized copper azole (MCA), which is a darker brown in colour, is less prone to off-gassing, and the preservative is less likely to wash off. Pressure-treated lumber can take weeks or even months to dry. It is used for a variety of applications ranging from outdoor decking to utility poles, from railroad ties to playground equipment. You have to understand the difference between a water-based and an oil-based stain because of how they affect the wood and the colors. It uses the latest advancement in treated lumber, treated with an EPA-registered waterborne wood preservative system to protect against termite attack and fungal decay. It's the look you want without the work of staining. So while the pressure treatment process does provide a certain degree of protection, sealing your pressure-treated wood will help it to look better and last longer. Best of all, outdoor exposure testing shows that Many of our pressure treated sheds are guaranteed for 15 years against rot and decay without any need to re-treat. Copyright © 2014 Can Do Fence & Deck. Usually 1500-2500 PSI is adequate for pressure treated lumber. This colour will gradually fade away over time. Although this is a good choice for pressure-treated wood decks, you can change the colour with stain, deck paint, or another coating. Mountain Cedar is great cedar-inspired finish that amplifies the beauty of your deck while letting you see the wood grain. A new pressure treated wood is on the market now that has a brown colour. Kona Brown is a darker, tropical-inspired wood stain colour that looks incredible on older pressure-treated decks that need a bit more coverage for imperfections. Power washing is a cleaning technique intended to bring back some of the brightness of the wood's color. Tanalised E pressure treated timber has been impregnated with Tanalith E wood preservative under controlled conditions in a vacuum pressure impregnation plant.. One of the biggest giveaways is that pressure treated wood tends to have a greenish color, as the injected chemicals often give a green hue to the wood. Dura Color doesn't use a topical finish or stain that quickly fades away.